Installation Guide

Installation Guide

 


aerbubblr Microbubble Showerhead

 

Water Temperature

When you switch to Microbubble mode, the flow rate decreases, and water temperature may rise. Adjust the temperature as needed and avoid using Microbubble mode at excessively high temperatures to prevent scalding.

Internal Filter Replacement

To ensure optimal performance and water quality:

  • Remove the filter every month and visually inspect for sediment build-up or discoloration.
  • If you notice a significant drop in water pressure, replace the filter with a new one.

 

AE Shower Filter

 

Installation

A wrench and Teflon tape are provided as complimentary tools for installation. Ensure the filter is securely attached to the tap before usage to prevent leaks.

Filter Replacement

The lifespan of your filter varies depending on your water quality and usage. To ensure optimal performance and water quality:

  • Use the provided test reagent to help determine when replacement is needed. A good time to start checking is after about one month of usage, or earlier if heavy usage.
  • If you notice a significant drop in water pressure that improves when the filter is removed, replace the filter with a new one.

 

Chlorine Testing

  • Collect 30 ml of shower water in a clean container.
  • Add 2-3 drops of the provided test reagent.
  • Observe the color change: darker yellow indicates higher chlorine levels.

Keep out of reach of children.

 

Showerhead Suction Holder

To prevent accidental falls or injury:

  • Surface Preparation: Clean and dry your tile surface thoroughly before installation.
  • Attachment: Press the holder firmly against the surface to create a tight seal.
  • Verification: Gently tug on the mounted showerhead holder before each use to confirm it is securely attached.